Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
^
To install, tighten to 10 Nm (89 inch lbs.).
9. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These
tools cause scratches and gouges which make leak paths. Use a plastic scraping tool to remove all traces of the old gasket.
Clean the mating surfaces with a plastic scraper and metal surface prep. Follow the directions on the packaging.
10. To install, reverse the removal procedure.
^
Install a new coolant pump gasket.