Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
^
Stage 1: Tighten to 15 Nm (11 ft. lbs.).
^
Stage 2: Tighten to 34 Nm (25 ft. lbs.).
AWD vehicles
13. Raise the axle into position and install new bolts and nuts.
^
Tighten to 66 Nm (49 ft. lbs.).
14. Connect the vent hose to the differential housing vent tube.
All vehicles
15. Lower the engine and remove the special tools.
16. Install the LH engine support insulator through bolt and nut.
^
Tighten to 103 Nm (76 ft. lbs.).
17. Install the RH engine support insulator nut.
^
Tighten to 90 Nm (66 ft. lbs.).
