Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
Idler Pulley: Service and Repair
Accessory Drive Belt Idler Pulley - 4.0L SOHC
Removal and Installation
1. Rotate the accessory drive belt tensioner counterclockwise and remove the drive belt.
2. Remove the bolt and the accessory drive belt idler pulley.
^
To install, tighten to 47 Nm (35 ft. lbs.).
3. To install, reverse the removal procedure.
^
For correct belt routing, refer to Accessory Drive, Component Locations - 4.0L SOHC in the Description and Operation.
