Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
Installation
1. NOTE: Be sure the crankshaft rear sealing surface is clean and free of any rust or corrosion. To clean the crankshaft rear seal surface area, use
extra-fine emery cloth or extra-fine 0000 steel wool with metal surface prep.
Lubricate the crankshaft rear oil seal with clean engine oil.
2. Install the special tools.
3. Position the crankshaft rear seal.
4. Using the special tool, install the crankshaft rear seal.
5. Install the flexplate-to-crankshaft spacer.
6. Install the spacer plate.
7. Install the flexplate.
