Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
4. Detach the wiring harness bracket and position the harness aside.
5. Remove the heater tube bracket nut.
6. Remove the A/C line bracket nut at the dash panel.
-
To install, tighten to 11 Nm (8 lb-ft).
7. Disconnect the 2 heater hose clamps at the heater core.
8. Disconnect the evaporator inlet fitting.
-
Discard the O-ring seals.
9. Disconnect the evaporator outlet fitting.
-
Discard the O-ring seals.