Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
F6-F7
Normal Operation
The instrument cluster is hardwired to the low washer fluid switch (part of the windshield washer reservoir) through circuit CMC20 (VT). The low
washer fluid switch closes when the washer fluid level is approximately 1/3 full, providing a ground to the instrument cluster through circuit GD108
(BK/VT) and turning on the WASHER FLUID LOW LEVEL warning. When the washer fluid is above the low level, the low washer fluid switch
opens, removing the ground to the instrument cluster, and the WASHER FLUID LOW LEVEL warning turns off.
Possible Causes
-
Circuit GD108 (BK/VT) open
-
Circuit CMC20 (VT) open or short to ground
-
Washer fluid level switch (part of the windshield washer reservoir)
-
Instrument cluster
Test G: The Check Charging System Warning Is Inoperative
PINPOINT TEST G: THE CHECK CHARGING SYSTEM WARNING IS INOPERATIVE
G1-G2
Normal Operation
The charging system warning indicator is controlled by the instrument cluster based upon data received from the powertrain control module (PCM)