Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
3. NOTE: When installing the new EGR module gasket, install with the side with the raised circle facing the intake manifold.
Remove the bolts, the EGR system module and the gasket. Discard the gasket.
-
To install, tighten to 25 Nm (18 lb-ft).
4. NOTE: The EGR system module sealing surfaces are soft metals.
Carefully clean the EGR system module sealing surfaces.
5. To install, reverse the removal procedure.
-
Install a new EGR system module gasket.
