ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Restraints - Control Module DTCs & Associated Fault PIDs|Page 289 > < Restraints - Control Module DTCs & Associated Fault PIDs|Page 287
Page 1
background image

Air Bag Control Module: Service and Repair

RESTRAINTS CONTROL MODULE (RCM)

Special Tool(s)

Special Tool(s)

Removal

WARNING:

-

Always wear safety glasses when repairing an air bag SRS vehicle and when handling an air bag module. This will reduce the risk of
injury in the event of an accidental deployment.

-

Do not handle, move or change the original horizontal mounting position of the restraints control module (RCM) while the RCM is
connected and the ignition switch is ON. Failure to follow these instructions may result in the inadvertent deployment of the safety
canopy and risk of personal injury.

-

The RCM orientation is critical for correct air bag supplemental restraint system (SRS) operation. If a vehicle equipped with an SRS
system has been involved in a collision in which the center tunnel area has been damaged, inspect the mounting and bracket for
deformation. If damaged, the RCM must be installed new whether or not the air bags have deployed. In addition, make sure the area of

Restraints - Control Module DTCs & Associated Fault PIDs|Page 289 > < Restraints - Control Module DTCs & Associated Fault PIDs|Page 287