Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
Transmission Position Switch/Sensor: Service and Repair
Digital Transmission Range (TR) Sensor
Special Tool(s)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the cable shield by prying on the side of the shield closest to the boot, then sliding the shield away from the boot.
3. Move the rubber boot back to gain access to the connector.
4. Disconnect the digital transmission range (TR) sensor electrical connector.
5. Remove the selector lever cable from the manual control lever.
