Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
Steering Wheel: Service and Repair
Steering Wheel
Steering Wheel
Removal and Installation
1. Place the steering wheel in the straight-ahead position and turn the ignition switch to the OFF position.
2. Remove the driver air bag module. For additional information, refer to Air Bag Systems.
3. Disconnect the steering wheel switches electrical connector.
4. NOTE: A new bolt must be installed.
Remove the steering wheel bolt and the steering wheel.
^
Discard the bolt.
^
To install, tighten to 40 Nm (30 ft. lbs.)
5. To install, reverse the removal procedure.
