Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
6. Remove the selector lever cable and bracket.
7. Disconnect the intermediate shaft speed sensor electrical connector.
8. Remove the intermediate shaft speed sensor.
1
Remove the intermediate shaft speed sensor screw.
2
Remove the intermediate shaft speed sensor from the transmission.
^
Inspect the intermediate shaft speed sensor O-ring for damage. If damaged, install a new O-ring.
Installation
All vehicles
1. Inspect the O-ring seal for damage. Install a new seal if damaged. Lubricate the O-ring seal with petroleum jelly to prevent damage to the O-ring
seal.
1
Install the intermediate shaft speed sensor into the transmission.
