Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
Valve Body: Removal and Replacement
Main Control Valve Body
Main Control Valve Body
Special Tool(s)
Material
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. If equipped, remove the drain plug and drain the fluid.
3. NOTE: Clean the area around the connector to prevent contamination of the solenoid body connector.
Disconnect the solenoid body harness connector.
4. NOTE: The transmission fluid pan gasket is reusable. Clean and inspect for damage. If not damaged, the gasket should be reused.
Remove the 16 transmission fluid pan screws, fluid pan and gasket.