Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
7. If necessary, press the anti-lock brake sensor indicator ring from the outer CV joint.
Assembly
1. If removed, install a new anti-lock brake sensor indicator ring on the outer CV joint.
2. Lubricate the outboard CV joint.
1
Pack the outboard CV joint with grease from the kit.
^
One-third of the grease must be installed in the joint with the remainder placed in the boot.
2
Spread the remaining grease evenly inside the boot.
3. Position the boot so the rib on the boot is located in the groove of the shaft.
