Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
Wiper Motor: Service and Repair
Wiper Motor - Windshield
WIPER MOTOR - WINDSHIELD
Removal and Installation
1. Remove the front wiper pivot arms.
2. Remove the RH cowl grille panel.
3. Remove the LH cowl grille panel.
4. Disconnect the windshield wiper motor electrical connector.
-
Unclip the wiring harness from the wiper arm.
-
Position the wiring harness aside.
5. Remove the 3 windshield wiper assembly mounting bolts.
-
To install, tighten to 15 Nm (11 lb-ft).
6. Remove the windshield wiper assembly and position on a workbench.
7. Remove the windshield wiper motor mounting arm bolt and the wiper motor mounting arm.
-
To install, tighten to 15 Nm (11 lb-ft).
8. Remove the 3 windshield wiper motor mounting bolts.
-
To install, tighten to 15 Nm (11 lb-ft).
9. Remove the windshield wiper motor.
10. To install, reverse the removal procedure.