Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
Wiper Motor: Service and Repair
Wiper Motor - Rear Window
WIPER MOTOR - REAR WINDOW
Removal and Installation
1. Remove the rear wiper pivot arm.
2. Remove the rear window wiper motor grommet.
1
Remove the pivot shaft nut.
-
To install, tighten to 10 Nm (89 lb-in).
2
Remove the grommet.
3. Open the liftgate window.
4. Remove the wiper motor cover trim panel.
5. Remove the rear window wiper motor.
1
Disconnect the electrical connectors.
2
Remove the 2 rear window wiper motor nuts.
-
To install, tighten to 6 Nm (53 lb-in).
3
Remove the rear window wiper motor.
6. To install, reverse the removal procedure.