Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
Front Bumper Reinforcement: Service and Repair
FRONT BUMPER
Removal and Installation
1. Remove the front bumper cover.
2. If equipped, remove the two fog lamp assemblies.
1
Disconnect the electrical connectors.
2
Remove the six bolts (three each side).
3
Remove the two fog lamp assemblies.
3. WARNING: To avoid possible injury, support the front bumper before removing the nuts.
Remove the four nuts (two each side) and the front bumper.
4. To install, reverse the removal procedure.