Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
Cowl Moulding / Trim: Service and Repair
COWL PANEL GRILLE
Removal and Installation
1. Disconnect the driver side windshield washer hose from inside the engine compartment.
2. Remove the windshield wiper pivot arms.
1
Slide the clip so the windshield wiper pivot arm will clear the windshield wiper pivot shaft.
2
Pull the windshield wiper pivot arm from the windshield wiper pivot shaft.
3. Remove the cowl grille screw.
4. Remove the driver side cowl grille.
-
Pull up on the cowl grille to disengage the clips.
5. Remove the passenger side cowl grille.
-
Pull up on the cowl grille to disengage the clips and disconnect the washer hose.
6. To install, reverse the removal procedure.
