Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
If the safety canopy bridge resistor is removed, an open circuit fault will be generated by the restraints control module (RCM).
If a restraint system diagnostic tool is installed at the safety canopy electrical connector, a low resistance fault will be generated by the RCM.
Vehicles with safety canopies
15. Remove the passenger side C-pillar trim panel.
16
Disconnect the passenger side safety canopy electrical connector.
17. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger side safety canopy electrical connector.
18. Remove the driver side C-pillar trim panel.
19. Disconnect the driver side safety canopy electrical connector.
