Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
5. Remove the power lumbar motor.
1
Disconnect the power lumbar motor electrical connector.
2
Remove the power lumbar bladder hose.
3
Remove the power lumbar motor.
All vehicles
6. Remove the seat cushion frame from the seat cushion foam.
1
Unhook the seat cushion trim cover J-clips.
2
Remove the seat cushion frame from the seat cushion foam.
7. Invert the seat cushion trim cover.
8. Remove the swing rod to tie-down wire hog rings from the side swing rods (one on each side).