Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
5. CAUTION: Use care when disconnecting the seat cushion side shield from the seat cushion frame so the tabs on the seat cushion side
shield are not damaged.
Disconnect the front seat cushion side shield.
6. Disconnect the power lumbar switch electrical connector and the power lumbar hose from the power lumbar switch.
7. Disconnect the heated seat switch electrical connector.
8. Pinch the retainer tabs and push the heated seat switch up and out of the seat side shield.
INSTALLATION
1. To install, reverse the removal procedure.
