Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
Brake Rotor/Disc: Service and Repair
Front
Brake Disc
Removal
All vehicles
1. Remove the front disc brake caliper anchor plate.
4x4 vehicles
2. NOTE: Match-mark the brake disc and hub.
Remove the brake disc.
3. CAUTION: Use a hub-mount brake lathe if necessary to machine the brake disc. Measure the brake disc and resurface as necessary.
Install a new brake disc if beyond specification.
4x2 vehicles
4. NOTE: Match-mark the brake disc and hub.
Remove the brake disc and hub as follows:
1
Remove the hub grease cap.
2
Remove the cotter pin.
3
Remove the nut retainer.
4
Remove the spindle nut.
5
Remove the front wheel outer bearing retainer washer.
6
Remove the outer front wheel bearing.
7
Remove the brake disc and hub.