Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
10. Remove the bolt and position the fuel supply tube aside.
11. Disconnect the EGR vacuum hose and the EGR tube from the valve.
12. Remove the bolt and position the electrical connector aside. Disconnect the radio interference capacitor electrical connector.
13. Carry out the following:
^
Detach the two spark plug wire retainers.
^
CAUTION: It is important to twist the spark plug wire boots while pulling upward to avoid possible damage to the spark plug wire.
NOTE: Spark plug wires must be connected to the correct ignition coil terminal. Mark spark plug wire locations before removing them.
Disconnect the LH spark plug wires from the ignition coil.
