Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
6. Squeeze the locking tabs and twist while pulling upward to remove the spark plug wires from the ignition coil.
7. Disconnect the spark plug wires from the separators and remove the spark plug wires.
INSTALLATION
1. CAUTION: Be sure to orient the spark plug boots so the spark plug wires do not contact the exhaust manifold.
NOTE: Apply silicone dielectric compound to the inside of the spark plug and ignition coil boots of the spark plug wire.
To install, reverse the removal procedure.
