ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Duct > < Temperature Blend Door Actuator|Page 6384
Page 4
background image

1. Release the stops and lower the glove compartment door to the floor.

2. Remove the screws and disconnect the vacuum hose.

3. CAUTION:  Do not attempt to bend any part of the lever. It is brittle and will break.

Rotate the vacuum control motor, disengage the lever, and remove the vacuum control motor.

INSTALLATION

1. To install, reverse the removal procedure.

Air Duct > < Temperature Blend Door Actuator|Page 6384