Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
Vacuum Reservoir HVAC: Service and Repair
VACUUM RESERVOIR
REMOVAL
1. Prepare the vehicle for vacuum reservoir removal.
1
Disconnect the battery ground cable.
2
Remove the air cleaner assembly.
2. Remove the screws. Position the air cleaner housing mounting bracket out of the way.
3. Raise and support the vehicle.
4. Remove the screws.
5. Lower the vehicle.
6. NOTE: The vacuum hoses to the vacuum reservoir are not interchangeable. Note the location of each vacuum hose to make sure of correct
installation.
Label and disconnect the vacuum hoses. Remove the vacuum reservoir.
INSTALLATION
1. To install, reverse the removal procedure.
