Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
20. Attach the restraint system diagnostic tool to the vehicle harness side of the driver side safety canopy electrical connector.
All vehicles
21. Install the RCM Fuse F2.10 (10A) to the CJB and close the cover.
22. Connect the battery ground cable.
Reactivation
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, and notes at the beginning of the
deactivation procedure.
All vehicles
1. Remove the RCM fuse F2.10 (10A) from the CJB.
2. Disconnect the battery ground cable and wait at least one minute.
Vehicles with safety canopies
3. Remove the restraint system diagnostic tool from the vehicle harness side of the driver side safety canopy electrical connector.
4. Connect the driver side safety canopy electrical connector.
All vehicles