ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 2644 > < Air Bag Disarming and Arming|Page 2642
Page 13
background image

19. Disconnect the driver side safety canopy electrical connector.
20. Attach the restraint system diagnostic tool to the vehicle harness side of the driver side safety canopy electrical connector.

All vehicles

21. Install the RCM fuse F2.14 (1OA) to CJB and close the cover.
22. Connect the battery ground cable. For additional information,  See: Starting and Charging/Battery

Reactivation Procedure

Reactivation

All vehicles

1. Remove the RCM fuse F2.i4 (1OA) from the CJB.
2. Disconnect the battery ground cable and wait at least one minute.

Sport Trac vehicles with safety canopies

3. Remove the restraint system diagnostic tool from the vehicle harness side of the driver side safety canopy electrical connector.

Air Bag Disarming and Arming|Page 2644 > < Air Bag Disarming and Arming|Page 2642