Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
CAUTION: The use of any other type of transmission fluid than specified could result in transmission malfunction and/or damage. An overfill
condition of transmission fluid may cause shift or engagement concerns and possible damage.
Before adding fluid be sure that the correct type is being used. The type of fluid used is found on the fluid level indicator, on the handle, and in the
owners manual.
If fluid needs to be added, add fluid in 0.25L (1/2 pint) increments through the filler tube. Do not overfill the fluid.
Fluid Condition Check
1. Check the fluid level.
2. Observe the color and the odor. The color under normal circumstances should be dark reddish, not brown or black.
3. Hold the fluid level indicator over a white facial tissue and allow the fluid to drip onto the facial tissue and examine the stain.
4. If evidence of solid material is found, the transmission fluid pan should be removed for further inspection.
5. If the stain is a foamy pink color, this may indicate coolant in the transmission. The engine cooling system should also be inspected at this time.
6. If fluid contamination or transmission failure is confirmed by the sediment in the bottom of the transmission fluid pan, the transmission must be
disassembled and completely cleaned. This includes the torque converter and cooler lines.
7. Carry out diagnostic checks and adjustments. For additional information, refer to Diagnosis By Symptom. See: Powertrain
Management/Transmission Control Systems/Testing and Inspection/Symptom Related Diagnostic Procedures
