Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
Hose/Line HVAC: Service and Repair
CONDENSER TO EVAPORATOR LINE
REMOVAL
1. Prepare the vehicle for condenser to evaporator tube removal.
1
Disconnect the battery ground cable.
2
Recover the refrigerant.
3
Remove the air cleaner assembly.
2. Disconnect the condenser to evaporator tube from the A/C condenser core. Remove and discard the O-ring seal.
-
During installation, install a new O-ring seal lubricated with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft
YN-12-C) or equivalent meeting Ford specification WSH-M1C231-B.
3. Disconnect and remove the condenser to evaporator tube.
INSTALLATION
1. To install, reverse the removal procedure.
2. Evacuate, leak test, and charge the A/C system.
