ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Inertia Fuel Shutoff Switch > < Idle Speed/Throttle Actuator - Electronic|Diagrams|Page 4148
Page 1
background image

Idle Speed/Throttle Actuator - Electronic: Service and Repair

IDLE AIR CONTROL (IAC) VALVE

REMOVAL

1. Remove the accelerator control snow shield.

2. Disconnect the electrical connector, and remove the bolts and the idle air control (IAC) valve.

INSTALLATION

1. To install, reverse the removal procedure.

Inertia Fuel Shutoff Switch > < Idle Speed/Throttle Actuator - Electronic|Diagrams|Page 4148