Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
13. Install the ignition switch lock cylinder.
-
Align and install the ignition switch lock cylinder to the steering column.
-
Position the ignition switch lock cylinder to the off position.
14. NOTE: Make sure the wheels are in the straight-ahead position.
Install the steering wheel.
15. Position the lower steering column opening finish panel reinforcement and install the bolts.
16. Install the lower steering column opening finish panel.
1
Position the lower steering column opening finish panel to the instrument panel and push in at the top to seat the retaining clips.
2
Install the screws.
17. Position the hood release handle and install the screws.