Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
2
Remove the driver air bag module.
10. Connect the restraint system diagnostic tool 418-F088 to the driver air bag module electrical connector at the clockspring.
11. Open the glove compartment door past its stops.
12. Disconnect the passenger air bag module electrical connector.
13. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger air bag electrical connector.
Vehicles without safety canopies
14. NOTE: Do not deactivate the safety canopy module circuit by removing the safety canopy bridge resistor from the safety canopy electrical
connector.
