ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Rear Safety Belt Retractor|Page 7009 > < Rear Safety Belt Retractor
Page 1
background image

Seat Belt Retractor: Service and Repair
Rear Center Safety Belt Retractor

REAR CENTER SAFETY BELT RETRACTOR

Seat Belt Bolt Bit

SPECIAL TOOL(S)

REMOVAL

WARNING:  All safety belt assemblies including retractors, buckles, front seat belt buckle support assemblies (slide bar), shoulder belt height
adjusters (if so equipped) child safety seat tether attachments and attaching hardware should be inspected after any collision. All belt
assemblies should be installed unless a qualified technician finds the assemblies show no damage and operate properly. Belt assemblies not in
use during a collision should also be inspected and installed if either damage or improper operation is noted.

1. Remove the second row 60 percent seat.

2. Separate the J-clips at the bottom of the seat backrest trim cover.

3. Remove the staples and release the trim cover.

Rear Safety Belt Retractor|Page 7009 > < Rear Safety Belt Retractor