Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
3. NOTE: If the safety belt guide cover is damaged or if it does not remain closed, install a new cover.
From behind the front safety belt guide cover, release the retaining tabs and open the cover.
4. Remove the nut and safety belt guide.
5. Remove the screw and the secondary safety belt guide.
-
Slide the secondary guide forward to remove.
6. Position the mat back, remove the bolt and the front row safety belt anchor.
7. Disconnect the driver side safety belt retractor pretensioner electrical connector.
