Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
3. Remove the side impact sensor.
1
Remove the bolt.
2
Disconnect the electrical connector.
3
Remove the side impact sensor.
INSTALLATION
1. Align the side impact sensor locator tabs to the holes in the C-pillar sheet metal.
2. Install the side impact sensor.
1
With the locator tabs aligned to the holes in the C-pillar sheet metal, position the sensor in place.
2
Install the bolt.
3
Connect the electrical connector.
3. Position back the trim panel and close the luggage compartment trim access doors panel.
4. Repower the SRS.