Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
Fog/Driving Lamp Switch: Service and Repair
FOG LAMP SWITCH
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the instrument panel finish panel.
1
Remove the screws.
2
Remove the center instrument panel finish panel.
-
Disconnect the electrical connectors.
3. Remove the fog lamp switch.
1
Remove the screws.
2
Remove the mounting bezel.
3
Release the two tabs and remove the fog lamp switch.
INSTALLATION
1. To install, reverse the removal procedure.