Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
15. Remove the nut and disconnect the power steering lines.
^
Drain the fluid into a suitable container.
^
Install new O-ring seals.
16. Plug the ends of the fluid lines and ports in the steering gear to prevent damage and entry of dirt.
17. CAUTION: Hold the tops of the steering gear to crossmember stud bolts to avoid damaging the steering gear fluid transfer tubes.
Remove the nuts.
18. Remove the stud bolts and washers.
19. Remove the steering gear to crossmember insulator bushings.
