Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
7. Install steering gear to crossmember insulator bushings as shown.
^
The large end of the metal sleeve must be positioned downward.
^
Check that the mounting surfaces on the crossmember are clean and free of foreign material.
8. Install the steering gear to crossmember washers and stud bolts.
^
The dished side of the washers lace down.
9. CAUTION: Hold the tops of the steering gear to crossmember stud bolts to avoid damaging the steering gear fluid transfer tubes.
Install the nuts.
10. Install the lines and clamp plate.