Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
Mark the rear driveshaft.
3. Remove the rear driveshaft.
1. Remove the rear driveshaft bolts.
2. Remove the rear driveshaft.
4. Using the special tools, remove the extension housing seal.
5. CAUTION: Use the extension housing bushing remover carefully so that the seal area is not damaged.
Using the special tool, remove the extension housing bushing.
Installation
1. CAUTION: The lube hole in the extension housing bushing must be aligned with the lube groove in the extension housing. This groove is located
