Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
Remove the extension housing. Discard the extension housing gasket.
Installation
1. Clean the extension housing and install a new extension housing gasket. Make sure that the parking pawl, spring and shaft are correctly installed.
2. CAUTION: Make sure the parking lever actuating rod is correctly seated into the case parking rod guide cup.
Install the extension housing.
^
Position the extension housing and install the six extension housing screws and studs.
3. Install the transmission mount into the crossmember and tighten the nuts.
4. Install the wire harness locators from the extension housing wire bracket.
5. Install the transfer case.
6. Fill the transmission with clean automatic transmission fluid to the correct level and check for correct transmission operation.
