Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
^
Align the retaining pins to the holes in the solenoid clamps and press in the main control valve body wire harness guide and protector.
16. Install the transmission fluid filter.
Install the transmission fluid filter.
^
Install the transmission fluid filter screw.
17. Install the transmission fluid pan.
1. Position a new transmission fluid pan gasket on the transmission fluid pan.
2. Install and align the transmission fluid pan.
18. Tighten the transmission fluid pan screws.
^
Tighten the transmission fluid pan screws in a crisscross sequence.
19. If equipped, position the servo heat shield over the servos and clip it to the pan rail.
