Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
4. Use the special tool to prevent the flange from turning. Install the washer and the new nut.
5. CAUTION: Align the index marks.
NOTE: Install the driveshaft with new bolts. If new bolts are not available, coat the threads of the original bolts with Threadlock and Sealer
EOAZ-19554-AA or equivalent meeting Ford specification WSK-M2G351-A5.
Connect the driveshaft to the transfer case and install the bolts.
6. Lower the vehicle.
