Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
11. Remove the 12 rear window glass module nuts.
12. Push the rear window glass module out at the top.
13. NOTE: In order for the rear window glass to function correctly the locating clip must engage the pinch weld at the rear of the cab during
installation.
Lift the rear window glass module from the rear of the cab to disengage the locating clip.
14. Remove the excess foam butyl from the window opening.
15. If necessary, remove the center rear window glass from the module.
INSTALLATION
1. To install, reverse the removal procedure.
