Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
2. Install the ground strap and nut.
3. Connect the electrical connector.
4. Install the wiper mounting arm and pivot shaft arms to the windshield wiper motor.
1
Install the LH wiper mounting arm and pivot shaft onto the windshield wiper motor crank pin.
2
Install the RH wiper mounting arm and pivot shaft onto the wiper motor crank pin.
3
Push the retaining clip until it snaps into place.
5. Install the cowl grilles.
6. Connect the washer hose to the LH washer jet nozzle.
7. Install the LH wiper pivot arm.
8. Adjust the LH wiper pivot arm. Refer to Windshield Wiper Blade and Pivot Arm Adjustment.