Explorer Sport Trac 4WD V6-4.0L VIN K Flex Fuel (2004)
1. Install the RH and LH wiper mounting arms and pivot shafts.
1
Position the wiper mounting arm and pivot shafts into place.
2
Install the two nuts.
2. CAUTION: To avoid possible damage to the windshield wiper adapter and connecting arm clip, be sure the clip is fully seated before
installing the adapter and connecting arm clip on the windshield wiper motor crank pin.
If removed, install the clip onto the RH wiper mounting arm and pivot shaft.
3. Install the wiper mounting arm and pivot shaft assemblies.
1
Install the LH wiper mounting arm and pivot shaft onto the windshield wiper motor crank pin.
2
Install the RH wiper mounting arm and pivot shaft onto the wiper motor crank pin.
3
Push the retaining clip until it snaps into place.
4. Install the cowl grilles.
5. Adjust the LH and RH wiper pivot arms. Refer to Windshield Wiper Blade and Pivot Arm Adjustment.
