Explorer Sport Trac 4WD V8-4.6L (2008)
4. Remove the wedge screw and wedge. Note orientation for reinstallation.
-
To install, tighten to 8 Nm (71 lb-in).
5. Remove the 3 bolts and PRB motor.
6. To install, reverse the removal procedure.
4. Remove the wedge screw and wedge. Note orientation for reinstallation.
-
To install, tighten to 8 Nm (71 lb-in).
5. Remove the 3 bolts and PRB motor.
6. To install, reverse the removal procedure.