Explorer Sport Trac 4WD V8-4.6L (2008)
19. Connect the LH side passenger air bag module electrical connector.
20. Install the passenger air bag module heat shield and the 4 bolts. Attach the wiring retainer.
21. Close glove compartment door.
22. Remove the restraint system diagnostic tools from the clockspring electrical connectors at the top of the steering column.
23. CAUTION: The driver air bag module electrical connectors are unique and cannot be reversed when connected to the driver air bag
module. Match the electrical connector key to the keyway in the driver air bag module. Do not force the electrical connectors into the
driver air bag module. Damage to the connector or component may occur.
Connect the driver air bag module electrical connectors as noted in removal.
