Explorer Sport Trac 4WD V8-4.6L (2008)
8. Driver seat with 10-way power, disconnect the backrest power feed electrical connector and route out the wire harness.
-
Release any wire harness retainers.
Heated seat
9. NOTE: Passenger shown, driver similar.
Disconnect the cushion and backrest heated seat mat electrical connectors.
All seats
10. Release the pin-type retainers, disconnect and route out the side air bag module electrical connector and wire harness.
11. Remove the safety belt buckle and pretensioner electrical connector cover.
12. Disconnect the safety belt buckle and pretensioner electrical connector and safety belt buckle switch electrical connector.
13. Release all the cushion trim cover retainers.
14. Remove the seat cushion foam pad and cushion trim cover.
15. Remove the 4 cushion frame-to-seat track nuts and the seat track.
