Explorer Sport Trac 4WD V8-4.6L (2008)
Fan Blade: Service and Repair
Cooling Fan
Removal and Installation
Vehicle equipped with a 4.6L (3V)
1. Remove the air cleaner outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
All vehicles
2. Remove the coolant expansion tank.
3. Remove the bolt and position the power steering fluid reservoir aside.
^
To install, tighten to 10 Nm (89 lb-in).
4. Remove the bolts, then unclip the upper fan shroud from the lower fan shroud and remove the upper fan shroud.
^
To install, tighten to 7 Nm (62 lb-in).
5. Disconnect the fan clutch electrical connector.
6. Remove the fan clutch wiring harness bracket bolt.
^
To install, tighten to 7 Nm (62 lb-in).
