Explorer Sport Trac 4WD V8-4.6L (2008)
Removal
CAUTION: The camshaft procedure must be followed exactly or damage to the valves and pistons will result.
1. Position the crankshaft damper spoke at the 12 o'clock position and the timing mark indentation at the 1 o'clock position.
2. Remove the RH valve cover.
3. CAUTION: Damage to the camshaft phaser and sprocket assembly will occur if mishandled or used as a lifting or leveraging device.
Loosen and backoff the RH camshaft phaser and sprocket bolt one full turn.
4. Disconnect the RH camshaft position (CMP) sensor electrical connector.
5. Remove the bolt and the RH CMP sensor.
